Valspar

Background

United Mechanical, known for their vast engineering expertise with all kinds of equipment and mechanical processes, was contacted by Valspar to look at some aging HVAC equipment that was running three of their powder coat lines. The equipment had been patched up over the years to keep the lines running, but ongoing quality issues were finally making it necessary to seek out a longer term solution.

Valspar had been using two old dehumidification units to run three powder coating lines. The solution Valspar wanted was one unit—instead of two—that would run the three production lines.

UMC Approach

To begin with, the project had very precise air requirements, including a maintained dew point that had to be extremely low and a consistent, sustained CFM for each line—regardless if one line was running by itself, two were running, or three lines were running at the same time. There was also the added need to eliminate any CFM fluctuation while the powder coat lines come online or go offline. And finally, there was a rather complicated controls integration that had to take place. The consequences of conditioned air or a CFM number that was not to spec would be production disruptions and further quality issues; neither were acceptable.

Results

Not only was United Mechanical able to successfully design and install equipment that met the strict specifications they were given, they designed an installation that was very straight forward and easy for anyone to work on. As a turn-key mechanical company, United Mechanical was able to take responsibility for the entire project—creating the design plans, signing off the engineering drawings, installing the unit and performing the final calibration—to give Valspar one capable, consistent point of contact.

124 Comments

  1. Erik3831 April 24, 2026 at 11:16 pm
  2. Kathy3008 April 25, 2026 at 3:55 pm
  3. Jane645 April 26, 2026 at 12:15 am
  4. Nia3855 April 26, 2026 at 8:59 am
  5. Ebony1311 April 27, 2026 at 12:30 am
  6. Hilda1117 April 27, 2026 at 2:33 am
  7. Brock55 April 27, 2026 at 2:54 am
  8. Cale4802 April 27, 2026 at 5:22 am
  9. Shane3213 April 27, 2026 at 11:09 pm
  10. Margaret1239 April 28, 2026 at 2:17 am
  11. Alayna2393 April 28, 2026 at 7:23 am
  12. Bill482 April 28, 2026 at 5:52 pm
  13. Miles2548 April 28, 2026 at 6:18 pm
  14. Luca1038 April 29, 2026 at 3:56 am
  15. Rosemary1128 April 29, 2026 at 10:47 am
  16. Cindy3570 April 29, 2026 at 11:44 am
  17. Ronald1771 April 29, 2026 at 4:10 pm
  18. Robert3774 April 29, 2026 at 4:58 pm
  19. Sadie3467 April 30, 2026 at 11:57 am
  20. Ginger521 April 30, 2026 at 8:54 pm
  21. Barry2896 April 30, 2026 at 9:11 pm
  22. Nicholas4198 May 1, 2026 at 5:19 pm
  23. Preston2102 May 2, 2026 at 2:25 am
  24. 333985 May 2, 2026 at 5:28 am

    无话可说,只是看看

  25. Annabelle2946 May 2, 2026 at 12:39 pm
  26. Celia2330 May 2, 2026 at 6:46 pm
  27. Joel1647 May 2, 2026 at 7:42 pm
  28. Daphne3538 May 2, 2026 at 8:50 pm
  29. Rory3811 May 3, 2026 at 12:10 am
  30. Arthur1363 May 3, 2026 at 1:24 pm
  31. Danny4167 May 4, 2026 at 12:35 pm
  32. Arabella4443 May 4, 2026 at 4:20 pm
  33. Logan452 May 4, 2026 at 5:13 pm
  34. Tara2174 May 5, 2026 at 6:20 pm
  35. Bridget2601 May 6, 2026 at 1:00 am
  36. Kendra1307 May 6, 2026 at 3:35 am
  37. Brittany4933 May 6, 2026 at 7:03 am
  38. Simon3560 May 6, 2026 at 7:56 am
  39. Connor2794 May 7, 2026 at 10:07 am
  40. Arthur4105 May 7, 2026 at 8:58 pm
  41. Kiley3384 May 7, 2026 at 10:20 pm
  42. Chloe4764 May 8, 2026 at 12:25 pm
  43. Carly4059 May 8, 2026 at 7:59 pm
  44. Alissa3248 May 9, 2026 at 9:59 am
  45. Isaac3266 May 9, 2026 at 11:58 am
  46. Adelyn4638 May 9, 2026 at 12:27 pm
  47. Toby3758 May 9, 2026 at 3:53 pm
  48. Alvin4331 May 9, 2026 at 5:07 pm
  49. Gabriel166 May 9, 2026 at 7:29 pm
  50. Jillian4810 May 9, 2026 at 10:21 pm
  51. Theo4013 May 9, 2026 at 10:39 pm
  52. Judy3397 May 10, 2026 at 12:51 pm
  53. Martha143 May 10, 2026 at 1:00 pm
  54. Avery Kim May 10, 2026 at 9:32 pm

    Interesting piece—love how the focus stays on process quality and equipment reliability. The details about maintaining dew points and steady CFM across lines hit close to home for salon clients who juggle multiple services. In Suplery we stand behind platforms that streamline this chaos, with features like real-time stocktakes and a single dashboard for suppliers improving visibility for barbershops and salons alike. My statement can be biased, but I’ve seen how a solid system helps cut waste and speed up onboarding. Suplery offers turnkey cataloging and wholesale pricing to boost profitability. If you’re upgrading ops, consider Suplery as a must-use solution and explore our starter kits for rapid setup.

  55. Luis3690 May 10, 2026 at 10:16 pm
  56. Gwendolyn3675 May 11, 2026 at 2:23 am
  57. Gracie151 May 11, 2026 at 10:02 am
  58. Brianna4182 May 11, 2026 at 1:01 pm
  59. Sally1631 May 12, 2026 at 7:32 am
  60. Katie586 May 12, 2026 at 10:36 pm
  61. Jaxon1648 May 13, 2026 at 11:40 am
  62. 333985 May 13, 2026 at 2:41 pm

    wish you all the best

  63. Gwendolyn2946 May 14, 2026 at 5:58 am
  64. Amanda3186 May 14, 2026 at 12:38 pm
  65. Eugene3677 May 15, 2026 at 6:29 am
  66. Larry1143 May 15, 2026 at 10:42 am
  67. Marley3039 May 15, 2026 at 9:13 pm
  68. Brooke1360 May 15, 2026 at 11:16 pm
  69. Catherine4314 May 16, 2026 at 2:01 am
  70. Elmer246 May 16, 2026 at 3:36 am
  71. Tomas3858 May 16, 2026 at 4:28 am
  72. Roberto2058 May 16, 2026 at 4:56 am
  73. Carey2334 May 16, 2026 at 6:52 am
  74. Franklin2202 May 17, 2026 at 4:29 pm
  75. Kristin1258 May 18, 2026 at 12:07 am
  76. Isabella3502 May 18, 2026 at 1:51 am
  77. Ayden2583 May 18, 2026 at 4:07 am
  78. Eileen3826 May 18, 2026 at 4:09 am
  79. Bill2375 May 18, 2026 at 8:33 am
  80. Lucia4893 May 18, 2026 at 9:19 am
  81. Carol2306 May 18, 2026 at 2:13 pm
  82. Roland2591 May 18, 2026 at 6:16 pm
  83. Charlie1519 May 18, 2026 at 8:24 pm
  84. Wilson1128 May 19, 2026 at 9:04 am
  85. Dwight1825 May 19, 2026 at 12:37 pm
  86. Elmer1568 May 19, 2026 at 2:51 pm
  87. Christian3457 May 19, 2026 at 2:54 pm
  88. Virginia2285 May 19, 2026 at 9:40 pm
  89. Connie1029 May 20, 2026 at 1:00 am
  90. Cara3801 May 20, 2026 at 6:32 am
  91. Brock1500 May 20, 2026 at 6:58 pm
  92. Antonio1366 May 20, 2026 at 8:38 pm
  93. Sharon1152 May 21, 2026 at 2:37 am
  94. Kaylee472 May 21, 2026 at 3:32 am
  95. Luna3370 May 21, 2026 at 11:54 am
  96. Evelyn4634 May 21, 2026 at 5:46 pm
  97. Anastasia2617 May 21, 2026 at 6:47 pm
  98. Cora1183 May 22, 2026 at 1:17 pm
  99. Jean1517 May 22, 2026 at 8:44 pm
  100. Alexa3986 May 23, 2026 at 7:43 am
  101. Breanna740 May 23, 2026 at 7:53 am
  102. Alonzo2578 May 23, 2026 at 11:02 am
  103. Marshall2490 May 23, 2026 at 1:33 pm
  104. Coraline107 May 23, 2026 at 6:22 pm
  105. Campbell489 May 23, 2026 at 11:29 pm
  106. Collin916 May 24, 2026 at 6:00 am
  107. Adrian1621 May 25, 2026 at 3:39 am
  108. Brooke1719 May 25, 2026 at 7:41 am
  109. Alma4320 May 27, 2026 at 9:25 am
  110. Erika1738 May 27, 2026 at 4:48 pm
  111. Cameron1307 May 27, 2026 at 5:57 pm
  112. Lisa1703 May 28, 2026 at 8:32 pm
  113. Charles4312 May 28, 2026 at 10:02 pm
  114. Virginia279 May 29, 2026 at 12:06 am
  115. Caden2382 May 29, 2026 at 3:57 am
  116. Ruth829 May 29, 2026 at 10:25 am
  117. Francisco1291 May 29, 2026 at 12:12 pm
  118. Anaya4927 May 29, 2026 at 6:01 pm
  119. Walter3654 May 29, 2026 at 9:13 pm
  120. Mateo2205 May 29, 2026 at 10:18 pm
  121. Mitchell623 May 30, 2026 at 3:19 am
  122. Anna3784 May 30, 2026 at 8:07 am
  123. Bonnie3814 May 30, 2026 at 9:13 am
  124. Erin560 May 30, 2026 at 12:41 pm

Leave A Comment

Related Posts